There are many reasons why SD card is not detected on Windows 10. If you are experiencing the same issue, you have to exclude the cases one by one to solve this problem. Never hesitate to restart your computer. Most of the time, it settled question. As for unsolved situation, six solutions are provided below to work out the trouble of (micro) SD card not showing up on Windows 10.
1. Try SD Card on Another Device
Sometimes it is the computer interface that breaks, rather than SD card. In this case, just connect your SD card to another computer or Android phone. Alternatively, try another SD card to check the interface. There is no shortcut if you want to test the SD card not recognized or working on Windows 10.
2. Check SD Card in Disk Management
- Install and open AOMEI Partition Assistant Professional. Click 'All Tools' on the left side of windows and choose the 'Windows To Go Creator'. Choose 'Create Windows To Go with system disc/ISO', and click 'Next'. And select the SD card and click 'Browse' to choose the ISO file.
- Supports Windows 10, Windows 8.1/8, Windows 7, Vista, and XP (all editions, 32/64-bit) Download Now Windows Version Buy Now Before backing up the SD card, you should insert an SD card to the USB card reader and connect the card reader to your computer.
- Format SD card on Windows 10/8/7. It's easy to format SD under Windows which is able to format.
If your SD card doesn't show up in Windows 10 File System, but in Disk Management, check whether there is a drive letter for the card. Follow the steps below to add a drive letter:
- Step 1. Right click 'My Computer' and select 'Disk Management'.
- Step 2. In Disk Management, your SD card will appear as a removable disk. Check if it has a drive letter like D or E.
- Step 3. If not, right click the SD card and select 'Change Drive Letter and Paths'.
- Step 4. Click 'Add' and select a drive letter, then click 'OK'. Your SD card would be working in File System along with local disks.
Because even though I moved the hard drive boot sequence to the very end of the chain it still boots windows 7. I however have made a theory that I could just use a USB SD card reader in an actual USB port and run the SD card as a USB drive.
3. Remove SD Card Write Protection
There is a knowledge point that write protected SD card will not be displayed on other devices, except the original one. So if you did lock your SD card before, the first thing is to remove write protection from SD card. Check the lock switch beside the card or use disk utility. It can also fix SD card not showing up on Windows 10.
4. Undo Recent Changes
If the SD card is not detected in your computer after installing a new program or system build, then you may roll back your computer to the previous status. A few programs, especially some system utilities, are known as the villains of SD card not showing up problem. You can remove the newly-installed programs to see if the problem still exists. Or, check it Safe mode.
If you believe the program is caused due to a recent system build update, it may be a little troublesome to roll back to a previous version. As an alternative solution, you're suggested to update SD card driver first which may be out of date after the system update.
Install Windows 7 For Free
5. Reinstall/Update SD Card Driver
When you update Windows 10, it will automatically renew all device drivers. But if you still have problem with a device, it is still well worth a try to update or reinstall the driver. Here's how to update/reinstall driver to repair (micro) SD card not detected on Windows 10:
- Step 1. Click 'Start' and enter 'Device Manager'. Select it from the results.
- Step 2. Find your SD card and right click it, then select 'Update Driver'.
- Step 3. Select 'Search automatically for updated drive software'. If there is no new driver, try to look for one on the manufacturer's website and follow the installation wizard.
- Step 4. If it doesn't work to update driver, just right click the device and select 'Uninstall'. Then restart your computer, and Windows will reinstall the driver by itself.
6. Enable SD Card Reader
Disabled SD card will not show up on Windows 10. The steps to enable this function are the same as above. First, find your SD card in 'Device Manager' and right click it. If it shows 'Disable Device', then you have already enabled SD card reader and there is no need to do anything. If not, just select the option 'Enable Device'. Then Windows 10 could detect your SD card normally. In case it doesn't, try to enable several related services in your computer as described below.
Enable related services:
- Press Windows + R key, then type SERVICES.MSC in Run dialogue and hit Enter.
- Locate each of the services, right-click on them and choose Properties, then make them automatic in Startup mode:
- Human Interface Device Access
- Plug and Play
- PNP-X IP Bus Enumerator
- Shell Hardware Detection
- Storage Service
- UPnP Device Host
Restart your computer and then check if the problem is fixed or not.
7. Run Hardware and Device Troubleshooter
Troubleshooter is a built-in repair tool in Windows 10. It helps to fix common computer problems. You can also use it to solve (micro) SD card not detected on Windows 10 problem.
- Step 1. Click 'Settings'> 'Update & security'> 'Troubleshooter'.
- Step 2. Select 'Hardware and Devices', then click 'Run the troubleshooter'. After detecting the problem, the troubleshooter will fix it automatically.
8. Force Clear Undetected SD Card
If you have tried everything but all are invalid, you may have to force clear the SD card and set it up again. Please note that you will lose all the files stored in the memory card, which could be permanent.
- Step 1. Click on Start menu, type 'CMD', then right-click on Command Prompt and choose Run as administrator.
- Step 2. In Command Prompt (Administrator), type the following lines and hit Enter one by one.
- diskpart
- list disk
- select disk # (replace # with the number of the SD card. You can judge by memory size)
- attributes disk clear readonly
- Step 3. When you see 'Disk attributes cleared successfully' message, close Command Prompt.
Restart your computer, remove and reinsert the SD card, and check if the problem is solved.
Write In the End:
Accidentally deleted or lost important photos, videos and music on your SD card? Don't worry. Just try RePicvid Free Photo Recovery to help you recover deleted files from SD card with simple clicks. This software offers 'Advanced Settings' for better user experience. Apple keynote 9 2 15. Also, you're allowed to preview the recoverable files one by one. For detailed steps, please refer to how to recover deleted photos/videos from SD card.
Related Articles
Please enable JavaScript to view the comments powered by Disqus.6. Enable SD Card Reader
Disabled SD card will not show up on Windows 10. The steps to enable this function are the same as above. First, find your SD card in 'Device Manager' and right click it. If it shows 'Disable Device', then you have already enabled SD card reader and there is no need to do anything. If not, just select the option 'Enable Device'. Then Windows 10 could detect your SD card normally. In case it doesn't, try to enable several related services in your computer as described below.
Enable related services:
- Press Windows + R key, then type SERVICES.MSC in Run dialogue and hit Enter.
- Locate each of the services, right-click on them and choose Properties, then make them automatic in Startup mode:
- Human Interface Device Access
- Plug and Play
- PNP-X IP Bus Enumerator
- Shell Hardware Detection
- Storage Service
- UPnP Device Host
Restart your computer and then check if the problem is fixed or not.
7. Run Hardware and Device Troubleshooter
Troubleshooter is a built-in repair tool in Windows 10. It helps to fix common computer problems. You can also use it to solve (micro) SD card not detected on Windows 10 problem.
- Step 1. Click 'Settings'> 'Update & security'> 'Troubleshooter'.
- Step 2. Select 'Hardware and Devices', then click 'Run the troubleshooter'. After detecting the problem, the troubleshooter will fix it automatically.
8. Force Clear Undetected SD Card
If you have tried everything but all are invalid, you may have to force clear the SD card and set it up again. Please note that you will lose all the files stored in the memory card, which could be permanent.
- Step 1. Click on Start menu, type 'CMD', then right-click on Command Prompt and choose Run as administrator.
- Step 2. In Command Prompt (Administrator), type the following lines and hit Enter one by one.
- diskpart
- list disk
- select disk # (replace # with the number of the SD card. You can judge by memory size)
- attributes disk clear readonly
- Step 3. When you see 'Disk attributes cleared successfully' message, close Command Prompt.
Restart your computer, remove and reinsert the SD card, and check if the problem is solved.
Write In the End:
Accidentally deleted or lost important photos, videos and music on your SD card? Don't worry. Just try RePicvid Free Photo Recovery to help you recover deleted files from SD card with simple clicks. This software offers 'Advanced Settings' for better user experience. Apple keynote 9 2 15. Also, you're allowed to preview the recoverable files one by one. For detailed steps, please refer to how to recover deleted photos/videos from SD card.
Related Articles
Please enable JavaScript to view the comments powered by Disqus.This page describes how to install on an SD card on systems where the BIOS cannot boot from SD (e.g. IBM/Lenovo ThinkPad). This can be useful e.g. to set up an older laptop which did have a SD card slot but not an SSD but a slower classic HD (may be with some worn out bad sectors after all those years, so you don't entirely trust that disk anymore?), or if you want to have an entire OS on a portable SD you can swap between computers. (If your laptop's BIOS CAN boot from SD cards like it can from harddisks and USBs, then no special instructions are needed, as it's a standard install.)
You'll want to use a fast SD card for this purpose, maybe one you had lying around from a Raspberry Pi experiment? The SD card may likely be SLOWER than a SSD or even the original HDD. (Speed Class 10, see https://www.sdcard.org/developers/overview/speed_class/; an old SD card from a photo camera may or may not be fast enough for this approach to make sense in practice.)
The idea to get around the BIOS is to have just GRUB and /boot on either an internal HDD, or a USB stick you leave plugged in, and have the rest of the OS (maybe incl. /home etc.) on the SD card.
Start by doing a normal standard installation, but choose Installation type: Something else (You can create or resize partitions yourself, or choose multi.). Now put '/' on the SD (say as ext4 on /dev/mmcblk0p2, if you put a Swap /dev/mmcblk0p1 maybe) BUT make sure that /boot goes on say /dev/sda1 (or a USB stick device, slower than the SD), giving it 1 or few GBs. You may also want to use the rest of the space not needed for /boot on your HDD (or USB) to be e.g. /dev/sda2 on /media/hdd - in case you run out of space on that SD. As Device for boot loader installation, use /dev/sda (NOT /dev/sda1, and certainly NOT /dev/mmcblk - as your BIOS cannot boot from that).
How to take screenshot with ipad keyboard. You may try restarting now - but it won't work, yet. This is because while GRUB's initial stage IS loaded from the MBR on, and the Kernel CAN be loaded because /boot isn't on the SD, when that early initial Kernel which runs with the filesystem from /boot/initrd.img* wants to hand-over to our 'real' filesystem on the SD, it gets stuck.
The trick is to add support for SD cards into initrd.img:
Windows 7 Sd Card Download
How to add additional modules to initrd.img
What is rar extension how to open it. We need to chroot into the 'real' OS from the Live CD (Repair) session, and to do that want to set up a 'shadow' of it inside /mnt, so, similarly to what is explained on https://help.ubuntu.com/community/LiveCdRecovery:
We first take a look at how what's mounted where in our 'real' (non-LiveCD) running system:
And mount that inside /mnt (which should be empty):
We also have to have some of the special directories in /mnt before we chroot:
You may want to set-up a few more things before you chroot, e.g. this is useful: Claquette 1 5 download free.
Now we'll make /mnt our new root, so that we can run commands 'as if' we weren't on the LiveCD file systems anymore, but in the running 'real' OS (which doesn't boot yet / anymore):
And now we can start fixing things in it, e.g. this is what we need to get the SD card to work during the initial early kernel which runs with the file system loaded from initrd (which in our case is on HDD/SSD/USB), before it hands over to our real filesystem (which in our case is on the SD) :
And now we can finally rebuild our initrd.img* in /boot:
And restarting now should get you booted from the SD!
SD suspend/resume issues
E.g. IBM/Lenovo ThinkPad have an issue wherein resuming from suspended state with OS on SD doesn't work (see http://www.thinkwiki.org/w/index.php?search=sd+card).
BootFromUSB
LiveCdRecovery
<'>http://www.gnu.org/software/grub/manual/grub.html> - Grub 2 Manual
<'>http://www.ibm.com/developerworks/library/l-linuxboot/index.html> - Inside the Linux boot process (on IBM developerWorks)
<'>http://users.cecs.anu.edu.au/~okeefe/p2b/power2bash/power2bash.html> - From Power Up To Bash Prompt (old)
CategoryInstallationCategoryLiveCategoryBootAndPartitionCategoryBackupRecovery